![ZRCarbon](/img/default-banner.jpg)
- Видео 44
- Просмотров 1 331 025
ZRCarbon
Великобритания
Добавлен 6 янв 2021
Hi!
I make custom carbon fiber and custom built bikes. I'm hugely passionate about my work. Thanks for watching :)
Check out my Insta - @ZRC_works
I make custom carbon fiber and custom built bikes. I'm hugely passionate about my work. Thanks for watching :)
Check out my Insta - @ZRC_works
Carbon Fiber Mudguard Making - Building a Scrambler PT.2
Hi and welcome back to my channel.
#easycomposites #carbonfiber #scrambler
My instagram: zrc_works
If you found this helpful or simply wish to support the channel or just want to buy me a coffee, feel free to donate to the "Tip Jar" via the PayPal link below. Thank you!
www.paypal.com/donate/?hosted_button_id=SJMQKC2ZG5RUG
The materials I used for the front fender build:
XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre: www.easycomposites.eu/xc110-210g-22-twill-3k-prepreg-carbon-fibre
XC110 416g 2x2 Twill 6k Prepreg Carbon Fibre: www.easycomposites.eu/xc110-416g-22-twill-6k-prepreg-carbon-fibre
XC130 150g Unidirectional Prepreg Carbon Fibre: www.easycomposites.eu/xc130-150g-unidirecti...
#easycomposites #carbonfiber #scrambler
My instagram: zrc_works
If you found this helpful or simply wish to support the channel or just want to buy me a coffee, feel free to donate to the "Tip Jar" via the PayPal link below. Thank you!
www.paypal.com/donate/?hosted_button_id=SJMQKC2ZG5RUG
The materials I used for the front fender build:
XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre: www.easycomposites.eu/xc110-210g-22-twill-3k-prepreg-carbon-fibre
XC110 416g 2x2 Twill 6k Prepreg Carbon Fibre: www.easycomposites.eu/xc110-416g-22-twill-6k-prepreg-carbon-fibre
XC130 150g Unidirectional Prepreg Carbon Fibre: www.easycomposites.eu/xc130-150g-unidirecti...
Просмотров: 2 223
Видео
Building a Scrambler PT.1- Absolute trash! Why did I buy it? - Suzuki GS1100G
Просмотров 1 тыс.3 месяца назад
Hi! Welcome back to my channel I'm building a scrambler out of this Suzuki GS1100G. The bike will have many carbon fiber parts made by me as I mainly work with carbon fiber. Follow the full build on RUclips. To not miss any episodes please Subscribe. Thanks so much for watching!🏍🛠🤟 If you found this helpful or simply wish to support the channel or just want to buy me a coffee, feel free to dona...
Carbon Fiber Front Fairing PT.2 - Making The Carbon Part - ZX6R build PT.9
Просмотров 13 тыс.3 месяца назад
Hi and welcome back to my channel. The materials I used for the fairing build: XC130 450g 2x2 Twill 12k Prepreg Carbon Fibre: www.easycomposites.eu/xc130-450g-22-twill-12k-prepreg-carbon-fibre XC130 210g 2x2 Twill 3k Prepreg Carbon Fibre: www.easycomposites.eu/xc130-210g-22-twill-3k-prepreg-carbon-fibre Easy-Lease Chemical Release Agent: www.easycomposites.eu/easylease-chemical-release-agent VM...
Carbon Fiber Front Fairing PT. 1- Mould Making - ZX6R build PT.8
Просмотров 8 тыс.4 месяца назад
Hi, welcome back to my channel. The materials I used for the mould making: MEKP Catalyst: www.easycomposites.eu/mekp-catalyst Uni-Mould Tooling Resin: www.easycomposites.eu/uni-mould-polyester-tooling-resin Uni-Mould Coupling Coat: www.easycomposites.eu/uni-mould-vinylester-coupling-coat High Temp Epoxy Tooling Gelcoat: www.easycomposites.eu/eg160-high-temperature-epoxy-tooling-gel-coat High Te...
Carbon Fiber Side Cover Time-Lapse - ZX6R build PT. 7
Просмотров 37 тыс.4 месяца назад
Hi and welcome back to my channel! Instagram: ZRC_works The materials I used in this project Filleting Wax - www.easycomposites.eu/soft-yellow-filleting-filling-wax Chemical Release Agent - www.easycomposites.eu/easylease-chemical-release-agent High Temp Epoxy Tooling Gelcoat - www.easycomposites.eu/eg160-high-temperature-epoxy-tooling-gel-coat Uni-Mould Coupling Coat - www.easyc...
Carbon Prepreg Bracket Build - ZX6R build PT. 6
Просмотров 12 тыс.8 месяцев назад
This was one of my favourite build so far. I love making carbon fibre parts with the purpose of replacing aluminium parts. I hope you're enjoying my videos as much as love making them. Keep an eye on the next video! Many more coming out very soon. Subscribe and hit the notifications button to not miss any of them. My instagram: zrc_works zrc_works?igsh=YzVkODRmOTdmMw & The links f...
Carbon Fiber Tail Fairings - ZX6R build PT. 5
Просмотров 54 тыс.9 месяцев назад
My ZX6R finally got its carbon fiber tail fairings done. The bike slowly coming together and it will look super cool. I was so happy with how the whole fairing looked on the bike. I hope you're also enjoying my videos throughout the whole build. If you do, definitely keep an eye out for the upcoming videos. Thanks so much for watching! My Instagram: zrc_works zrc_works?igshid=MTk0...
Carbon Fiber Front Mudguard - ZX6R build PT. 4
Просмотров 137 тыс.9 месяцев назад
This project was giving me a hard time. I almost thought this video would never make it to RUclips. I hope you'll never make the same mistake as I did. There is plenty more content coming out soon. Continuing my build with the tail section fairings. Thanks for watching! My instagram: zrc_works?igshid=OGQ5ZDc2ODk2ZA & Check it out if you would like to see more carbon fibre!!!! Budg...
Kawasaki ZX6R 636 Rebuild PT.3 - Reassemble
Просмотров 21 тыс.Год назад
Kawasaki ZX6R 636 Rebuild PT.3 - Reassemble
Kawasaki ZX6R 636 Rebuild PT2. - Engine Rebuild
Просмотров 32 тыс.Год назад
Kawasaki ZX6R engine rebuild video.This video shows start to finish my bike engine rebuild. Before the rebuild I had dark smoke and a smell, like burnt oil, coming out through the exhaust. I knew something wasn't right. After a while, finally, I got around to pull apart the engine and fix that issue. The problem was caused by the valve stem oil seal leaking oil into the combustion chamber. Also...
Kawasaki ZX6R 636 Rebuild PT.1 - Teardown
Просмотров 10 тыс.Год назад
Kawasaki ZX6R 636 Rebuild PT.1 - Teardown
Carbon Fiber Ducati Front Bracket Done Part 2 - Super Light Panigale Part 4
Просмотров 10 тыс.Год назад
Carbon Fiber Ducati Front Bracket Done Part 2 - Super Light Panigale Part 4
Prepreg Carbon Fiber Front Bracket First Try/Fail Part 1 - Super Light Panigale Part 3
Просмотров 44 тыс.Год назад
Prepreg Carbon Fiber Front Bracket First Try/Fail Part 1 - Super Light Panigale Part 3
Prepreg Carbon Fiber Ducati Lower Farings - Super Light Panigale Part 2
Просмотров 282 тыс.Год назад
Prepreg Carbon Fiber Ducati Lower Farings - Super Light Panigale Part 2
Making Carbon Fiber Seat Cover - Super Light Panigale Part 1
Просмотров 159 тыс.2 года назад
Making Carbon Fiber Seat Cover - Super Light Panigale Part 1
Ducati Panigale on a BUDGET Part 4 - Brakes and Fluids
Просмотров 9 тыс.2 года назад
Ducati Panigale on a BUDGET Part 4 - Brakes and Fluids
Carbon Fiber Air Intake Start to Finish Part 2 -Prepreg CF and Polish
Просмотров 18 тыс.2 года назад
Carbon Fiber Air Intake Start to Finish Part 2 -Prepreg CF and Polish
Unboxing FULL CARBON swingarm - Ducati Superleggera
Просмотров 27 тыс.2 года назад
Unboxing FULL CARBON swingarm - Ducati Superleggera
Honda GL1100 Cafe Racer Build Part 5 - Fabricating Weber Carburettor Intakes
Просмотров 14 тыс.2 года назад
Honda GL1100 Cafe Racer Build Part 5 - Fabricating Weber Carburettor Intakes
Carbon Fiber Air Intake Start to Finish Part 1 - Moulding
Просмотров 23 тыс.3 года назад
Carbon Fiber Air Intake Start to Finish Part 1 - Moulding
How To Make a Prepreg Carbon Fiber Part From Start to Finish
Просмотров 45 тыс.3 года назад
How To Make a Prepreg Carbon Fiber Part From Start to Finish
Ducati Panigale on a BUDGET Part 3 - Fork Seal and Air Filter
Просмотров 19 тыс.3 года назад
Ducati Panigale on a BUDGET Part 3 - Fork Seal and Air Filter
Ducati Panigale on a BUDGET Part 2 - Spark Plug and Oil Change
Просмотров 39 тыс.3 года назад
Ducati Panigale on a BUDGET Part 2 - Spark Plug and Oil Change
Ducati Panigale On A Budget Part 1 - Fixing Oil Leak and Start Up
Просмотров 10 тыс.3 года назад
Ducati Panigale On A Budget Part 1 - Fixing Oil Leak and Start Up
Honda GL1100 Cafe Racer Build Part 4 - Pulse Generator and Thermostat
Просмотров 13 тыс.3 года назад
Honda GL1100 Cafe Racer Build Part 4 - Pulse Generator and Thermostat
Honda GL1100 Cafe Racer Build Part 3 - Cylinder Head and Carbon Fiber
Просмотров 23 тыс.3 года назад
Honda GL1100 Cafe Racer Build Part 3 - Cylinder Head and Carbon Fiber
Carbon Fiber Clutch and Valve Cover - First Attempt
Просмотров 64 тыс.3 года назад
Carbon Fiber Clutch and Valve Cover - First Attempt
Honda GL1100 Cafe Racer Build Part 2 - Clutch and Water Pump
Просмотров 16 тыс.3 года назад
Honda GL1100 Cafe Racer Build Part 2 - Clutch and Water Pump
So I have to take the motor out in order to change the head gasket????
Love it. Great looking parts. Am i able to use your method but have a single carbon weeve for the first layer? Instead of random carbon pieces etc. thanks
Hi I have followed this video and got so far Where do you wire the mains too?
I’d have lost the will to live and got it done at Ducati Well done for your perseverance 👍
Why not use this opportunity to do some really nice art work with the patterns.
No gloves? Good sir, epoxy resin is no joke. You can get sensitized by this. Once you are, you cant get near epoxy ever again without getting an allergic reaction. Additionally the grease from your skin can cause delamination of the part.. It's surprising to me that people in this profession still work like this 🤦
Not really the guy comments Videos that much - but damn your work is outstanding ! The result is unreal, keep on !!
Love to see your work ! 😍 Can you tell, which bike this beautiful swingarm is from ? Looks way better than the original one ! Thanks and kind regards from Germany.
Hi On the temperature limiters there seems to be three hot wires on one of them and 3 cold wires on the other I only see one of each coming from the wiring assembely?
Bro after watching your video i feel confident that i can do it myself. Thank you!!!!!
that one little blemish on the corner, you think was from bridging of your materials over the corner of your mold surface?
Hello I am trying to follow this video On my oven that I have stripped I can't see any temperature limiters like in the video? I have the fan and the element
the carbon patterns, can you make it horizontal lines or it will messed up alignment only ?
How did you make the mounting? Is it 3d printed?
You have WhatsApp or telegram..I want learn something..I will pay fee😅
Bike is coming together nicely! Man carbon fibre is so lovely… until you drop the bike and damage it 😢 no easy fixing that compared to plastic fairings
lol what're you talking about. the best part of the composites is how easy they are to fix
What type of that plastic that u shoot use a heater gun before vacuum cure..?
Elaldudt :)
really like this. Im very tempted to get the carbon fairing a rear cowling for my bike. so this carbon has the hardener already in it? just heat to activate?
I have carbon front and rear huggers, side panels and fairing inserts, water cooler covers on my 01 FZ1. I shot violet pearl with 3 coats clear. LOVE IT. Get tons of compliments. Love your process. Keep up the great work
Is it preperg?
Yeah
256 >gram :))) Oh my Allah... Big Work...
Hello ZR, I would like to get in touch with you to make Carbon fiber Hardtop Roof for 2015 Mazda Miata MX-5. I’m based out of UK. How to contact and communicate with you.
Does the cam cap not seat all the way down to the head or as you tighten the bolts in sequence in snugs up ?
Your work is really neat.
I am glad that the part failed on you. Not because I am nasty, but because you were willing to show us the failures also, and why it happened. That way, we can learn from you, and do not have to (maybe?) experience the same (hopefully). Although the "patch" fender is not within my own taste, it is definitely something else. I have not seen it before (not that I have seen all styles in my life.) But nevertheless, the part you created, looks great, and taught us valuable knowledge. Thank you for sharing with us.
Looks great, like the random pattern design! I'll have to use the system you use for locating the mounts etc. Where I am from it's not easy to get the nice epoxy systems, prepreg etc so I use West System for most of my work. Learn alot from your videos I have watched the last 2 days! :)
the transcript 😂 "um uh i dont understand" 😂
I want my z900 done, do you by chance have a website I'm from the USA
Hey Send me an email to zrc.works@gmail.com Will talk about it Cheers
Hey man , thanks for sharing. What is the brand of your lift ? Look nice 👍
Hey The lift called abba skylift
@@zrcarbon9937 thank you 🙏
Great job on this video, perfect for seeing what's involved. And nice work on the bike, too! Subscribed. Thanks!
Thanks so much for the compliment I’m glad you liked it 🏍️🛠️🤘
It's really nice that you documented the failed attempt as well! Massive weight reduction! How did you calculate how much CF to add? I saw first video you used unidirectional pieces. Are you worried that the vibrations might cause issues with it? Ducati owner myself..
Question... the original dirty filter was a K&N and could have been reused after a cleaning and oiling. Was there a reason to replace it other than for the sake of the video?
Loved the lettering.
Muy buen video buena clase de mecanica y menuda maquina tan hermosa!
how your made white part for connect head light can you let me know? thank :)
What is the purpose of baking products? Can you just vacuum seal it and not bake it?
why in the debulking process does not use epoxy resin? I thought in the debulking process the resin was sucked by a vacuum
Kelihatannya mudah, namun ketika membuatnya itu sungguh sulit, good job😇
Question about the pump.. is it the same pump they use for HVAC
Would you be interested in creating some carbon race fairings for a 2008 ZX-10R? I could provide the original fairing pieces.
Hi Yes, let’s talk about it. Send me a message to zrc.works@gmail.com Thanks
Emailed you :-)
I didn't like the patchwork pattern when you were putting it into the mould, but the end result is beautiful and now I think I want that pattern for my engine cover 😂 I began making my first mould tonight and hope to have my first CF prototype next week 😁 your videos have been really helpful, thank you
Thanks, I’m glad you found my video helpful. I wish you the best for your project. 🛠️🤘
Never thought about the release agent having an expiration date.
Yeah me too. I experienced that, during the summer is more likely to go off.
Hi, can you share what material you use to made those lugs? Thanks
I used PLA but only for the prototype. In the future I’ll use cf
Is there a possibility to made those sort of lugs of carbon fiber? As they looks very tiny, I just can’t get my hear round how to made them with cf. I think the 3d printed lugs is the easiest way to made them. Is that epoxy will stick to the abs or petg lugs? Any thought! I’m asking as I’m in process right now to make my own cf motorcycle parts too. Thanks for sharing
@@sativa800 You can "forge" them with 3d printed molds
@@zrcarbon9937 You can use ABS for better chemical compatibility with the styrene in the resin and the adhesive
Nice job
Thanks so much! 🛠️🤘
How do you get the position of your clips right? Do you make a template or just measure/ guess?
Hey I make a mould of the pins and the their position. You could find the answer in my videos 🛠️🤘 Carbon Fiber Side Cover Time-Lapse - ZX6R build PT. 7 ruclips.net/video/ytP-t_B5J90/видео.html
Amazing nice and big job dude 🎉🎉🎉
Thanks so much! 🛠️🤘
How much months is it gonna take to make it (full carbon fiber scooter activa 1st gen ) this is my plan
Have you ever done composites?
qual site para comprar peças do motor?
Any updates on this? Would like to see that engine in a bike.
Unfortunately the goldwing is on hold at the moment. I’m having difficulties to find parts for the bike. 🤷♂️